> For the complete documentation index, see [llms.txt](https://enless.gitbook.io/centre-aide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/gateway-and-receivers/rx-lorawan/commands.md).

# Commands

Different components of the gateway.

The gateway has physical interfaces for adjusting network settings and manually managing the system status.

## RS485 Line Termination (Switch)

To ensure signal integrity on the field bus (especially over long distances), a switch can be used to activate a termination resistor.

* **OFF** : No termination (default position if the Gateway is not at the end of the line).
* **100** $$\Omega$$ : : Suitable for certain specific cables.
* **120** $$\Omega$$ : Standard for most RS485 buses.

<div align="left" data-with-frame="true"><figure><img src="https://1715332350-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F3HoPKoOlgG9Qj4E6fu0w%2Fuploads%2FkviBQpzKUDyigR4wxP7I%2F500_602_Zoom_Resistance_Terminaison_Face_v03.png?alt=media&amp;token=57ad5d17-a2e2-4fe9-8b36-26d1015a86e9" alt=""><figcaption></figcaption></figure></div>

## Reset Button

The pushbutton **RESET** allows quick maintenance operations without software access.

<div align="left" data-with-frame="true"><figure><img src="https://1715332350-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F3HoPKoOlgG9Qj4E6fu0w%2Fuploads%2FH1ZYpDSj9hRQ5ovx9EDw%2F500_602_Zoom_Reset_TroisQuarts_v01.png?alt=media&amp;token=e49eb3d5-b4d8-473e-b28b-8cbcaa53c5b4" alt=""><figcaption></figcaption></figure></div>

<table><thead><tr><th>Action</th><th width="128.1953125">Press duration</th><th>Visual signal</th><th>Result</th></tr></thead><tbody><tr><td>Restart</td><td>5 seconds</td><td>The Enless LED flashes</td><td>System restart.</td></tr><tr><td>Factory configuration</td><td>10 seconds</td><td>The Enless LEDs and <em>debug</em> flash.</td><td>Return to factory settings.</td></tr></tbody></table>

## USB-C Port

The *gateway* has a monitoring console accessible via the USB-C port. The port is natively recognized as a serial interface (Plug & Play) on most operating systems (Windows, macOS, Linux).

<div align="left" data-with-frame="true"><figure><img src="https://1715332350-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F3HoPKoOlgG9Qj4E6fu0w%2Fuploads%2FwI8EJShxAHOBbXJE5guT%2F500_602_Zoom_USB_C_TroisQuarts_v01.png?alt=media&amp;token=3be954f0-001c-4457-9ceb-eab36826d5c7" alt=""><figcaption></figcaption></figure></div>

1. Connect the *gateway* to your computer using a standard USB-C cable.
2. Use a serial terminal (e.g., PuTTY).
3. Apply the following configuration settings:

<table><thead><tr><th width="211.9140625">Parameter</th><th width="180.82421875">Value</th></tr></thead><tbody><tr><td>Speed (Baud rate)</td><td>9600 bps</td></tr><tr><td>Data bits</td><td>8</td></tr><tr><td>Parity</td><td>None</td></tr><tr><td>Stop bits</td><td>1</td></tr><tr><td>Flow options</td><td>CR/LF enabled</td></tr><tr><td>Local echo</td><td>Enabled</td></tr></tbody></table>

The connection established can be confirmed when the following message appears:

```
Welcome to Enless RX LoRaWAN Gateway

1) Print IP status
2) Monitor next logs
3) Print last-hour logs
```

## Rotary Selector

The rotary switch is currently reserved for future developments.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/gateway-and-receivers/rx-lorawan/commands.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.