> For the complete documentation index, see [llms.txt](https://enless.gitbook.io/centre-aide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/products/editor-22/installation/power-supply.md).

# Power supply

The TX IO receiver is designed for flexible on-site integration. It accepts a wide DC voltage range.

## Technical specifications

* Voltage range: 7.5 to 24 VDC.
* Typical consumption: 12V / 1A.
* Polarity: Wire <mark style="color:$danger;">**Red**</mark> (+) / Wire **Black** (-).

## Connection options

The installer has two methods available to power the device:

1. **Pre-installed wiring** : The product is supplied with a cable exiting through the cable gland. You can connect directly to this cable, respecting the color code (Red = Positive, Black = Ground/Negative).
2. **Custom wiring** : For a custom installation, it is possible to remove the original wiring. Unscrew the cable gland, remove the existing wires, and pass your own power cable for a direct connection to the internal terminals of the electronic board.

## Recommended accessory

For optimal reliability and simplified installation, Enless Wireless offers a dedicated mains power supply:

* Reference: **POWER 1000-002**
* Specifications: Regulated 12V power supply.

{% hint style="warning" %}
**Safety** : Before any intervention on the internal terminal block or modification of the wiring, make sure that the power source is**switched off**. Reversing the polarity may damage the receiver's electronic components.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/products/editor-22/installation/power-supply.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.