> For the complete documentation index, see [llms.txt](https://enless.gitbook.io/centre-aide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/products/editor-23/configuration/checks.md).

# Checks

{% hint style="success" %}
Checks are carried out directly by connecting to the TX MODBUS server.
{% endhint %}

## Configuring your computer

To communicate with the receiver, your computer must be configured on the same subnet as the device.

1. Connect your computer to the receiver's Ethernet port (directly or via a switch).
2. Change the IP settings of your network card with the following values:
   * IP address: `192.168.77.2`
   * Subnet mask: `255.255.255.0`
   * Gateway (Router): `192.168.77.1`

## Access to the Web Interface

1. Open your browser and enter the receiver's default IP address: `http://192.168.77.77`
2. The login page is displayed.
3. **Language** : Select your language (French/English) using the drop-down menu.

The **SLAVE PARAMETERS** tab of the TX Modbus will show you how the reading of the slaves has been configured from the receiver. 

{% embed url="<https://app.arcade.software/share/f7kJHgD7oloThxGVkjIQ>" %}

The **SLAVE STATUS** will show you the data read by the TX MODBUS on the slaves. You can confirm the same data and register values are being reported as in the receiver’s Modbus table.&#x20;

{% embed url="<https://app.arcade.software/share/giIKquixAigB4VIneKCE>" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/products/editor-23/configuration/checks.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.