> For the complete documentation index, see [llms.txt](https://enless.gitbook.io/centre-aide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/sensors/editor-2/use/sensor-installation.md).

# Sensor installation

TX T\&H E-INK AMB: sensor installation

The TX T\&H E-INK AMB is ideally installed on a wall or any other vertical support, away from direct light and away from a window to ensure measurement quality.

Wall mounting can be done in two ways:

* using the double-sided adhesive provided in the box
* using screws (and plugs if necessary) not supplied

#### With the adhesive provided

{% columns %}
{% column %}

<div data-with-frame="true"><figure><img src="https://1715332350-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F3HoPKoOlgG9Qj4E6fu0w%2Fuploads%2FMi0q8U0hkdd2qQvVb7GU%2F3M.png?alt=media&amp;token=77097239-51f2-465e-bdd9-6cace49b5708" alt=""><figcaption></figcaption></figure></div>
{% endcolumn %}

{% column %}

1. Attach the adhesive to the back of the sensor.
2. Position the sensor at the desired location.
3. Press for a few seconds so that the sensor adheres to the wall.
   {% endcolumn %}
   {% endcolumns %}

#### With screws

{% columns %}
{% column %}

<div data-with-frame="true"><figure><img src="https://1715332350-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F3HoPKoOlgG9Qj4E6fu0w%2Fuploads%2FaWSxkYWrpPps7NZZ59L4%2FProduits_Installations_Fixation.png?alt=media&amp;token=f6d10df3-37aa-4588-ae70-b5276460be46" alt=""><figcaption></figcaption></figure></div>
{% endcolumn %}

{% column %}

1. Remove the safety screw on the lower part of the sensor housing using a Phillips screwdriver.
2. Remove the transparent back cover of the sensor with a flat-head screwdriver.
3. Use the back cover to:
   1. mark, drill, and insert wall plugs into your support
   2. screw directly into the support
      {% endcolumn %}
      {% endcolumns %}

#### Finalization

{% hint style="info" %}
If you have not yet handled the **switch** **rotary**, wait until the installation is complete before putting the TX T\&H E-INK AMB back in place.
{% endhint %}

The front of the sensor is ready to be reassembled directly on the wall.

{% hint style="warning" %}
Don't forget the **screw** !
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/sensors/editor-2/use/sensor-installation.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.