> For the complete documentation index, see [llms.txt](https://enless.gitbook.io/centre-aide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/sensors/editor/use/push-button-use.md). # Push button use TX T\&H MINI: push button use The TX T\&H MINI AMB, like all sensors in the Room Control range, has a push button with several combinations. ## Combinations

		Cover image
Short press (less than 1s)	Send a test frame. The orange LED will flash once the frame is sent. Wait at least 3 seconds between each press of the push button	1S mini.png
Press until the blue LED appears	Enable Bluetooth mode for sensor configuration from the mobile app. When Bluetooth mode is enabled, the blue LED flashes. To exit Bluetooth mode, you can press the push button again for 5s until the blue LED stops flashing.	5S mini.png
Press until the green LED appears	Restart a JOIN Request. If you release the button when the green LED appears, the sensor restarts a JOIN Request (works only if the sensor is not already connected to a LoRaWAN network)	10S mini.png
Press until the red LED appears	Empty the sensor supercap. When you release the button when the red LED appears, the transmitter will drain its supercap so that no energy remains in the sensor electronics. You can then fully restart the product. Warning: this procedure must be carried out when the sensor battery is removed from its slot.	15S mini.png

--- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation by asking a question. Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters: ``` GET https://enless.gitbook.io/centre-aide/guides-installation/documentation-en/sensors/editor/use/push-button-use.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.