---
description: RX REPEATER 600-301
---

# Repeater Installation

One or more sensors remain out of range of the receiver: you will have to install a repeater. <mark style="color:blue;">**The repeater requires no configuration.**</mark>

## Position your repeater

We recommend positioning your repeater halfway between the transmitters and the Modbus receiver. The repeater comes with a 1/4 wave antenna but you can also use a long range antenna to maximize the performance of the repeater. You can chain several repeaters together.

## Power your repeater

Once positioned, power the repeater. The repeater can be powered either:&#x20;

• By a 12V power box&#x20;

• By a main power supply of 7.5 to 24VDC.

{% hint style="info" %}
Current characteristic for powering the repeater at 12Vdc: 1A max. Use only CE certified 12V power supply
{% endhint %}

In both cases, the wires will be connected to the POWER terminal block of the repeater:&#x20;

• Black wire connected to the 0V terminal block&#x20;

• Red wire connected to the V+ terminal block

## Meaning of the repeater LEDs

The repeater LED behavior is documented [here](led-sequence-meanings/repeater)

{% hint style="info" %}
On the configuration server, frames passing through a repeater indicate (R) next to the RSSI signal value.
{% endhint %}

{% embed url="https://app.arcade.software/share/ZYFQwa3qcpPSqNu9WMZo" %}
