# Installation

- [IP Configuration](/installation-guide-lora-proprietary/installation/ip-configuration.md): Configure your PC's IP settings to access the receiver's configuration server
- [Access to the Server](/installation-guide-lora-proprietary/installation/access-to-the-server.md): Prepare your receiver and access the configuration server
- [Receiver Update (optional)](/installation-guide-lora-proprietary/installation/receiver-update-optional.md): Update your receiver to the latest available firmware version (optional)
- [Sensor Configuration](/installation-guide-lora-proprietary/installation/sensor-configuration.md): Declare and configure sensors from the CONFIG TX tab of the receiver's server
- [Sensor Activation](/installation-guide-lora-proprietary/installation/sensor-activation.md): Power the sensors so they pair with the receiver.
- [Data Reception](/installation-guide-lora-proprietary/installation/data-reception.md): Verify that messages are being received correctly in the NETWORK tab.
- [Sensor Installation](/installation-guide-lora-proprietary/installation/sensor-installation.md): Position and mount the products in their final locations.
- [Receiver Settings](/installation-guide-lora-proprietary/installation/receiver-settings.md): Configure your receiver’s communication parameters in the CONFIG RX tab.
- [Modbus Receiver Communication Settings](/installation-guide-lora-proprietary/installation/receiver-settings/modbus-receiver-communication-settings.md): Configure the Modbus receiver communication settings from the CONFIG RX tab
- [BACnet Receiver Communication Settings](/installation-guide-lora-proprietary/installation/receiver-settings/bacnet-receiver-communication-settings.md): Configure the BACnet receiver communication settings from the CONFIG RX tab
- [HTTP Receiver Communication Settings](/installation-guide-lora-proprietary/installation/receiver-settings/http-receiver-communication-settings.md): Configure the HTTP receiver communication settings from the CONFIG RX tab
- [Receiver Connection to the Controller](/installation-guide-lora-proprietary/installation/receiver-connection-to-the-controller.md): Connect your receiver to the PLC / BMS
- [Recommendations](/installation-guide-lora-proprietary/installation/receiver-connection-to-the-controller/recommendations.md): Best practice guide for Enless receivers communication with your BMS
- [Troubleshooting](/installation-guide-lora-proprietary/installation/troubleshooting.md): Discover how our Help Center can answer your technical questions