---
description: >-
  This step allows you to validate the configuration of the registers and the
  values of the slave registers from the Modbus TX server.
---

# Checking

The[ ](https://app.gitbook.com/o/yf0Z0ky45cfMTgosyzeb/s/afhw4EZlx9MXqltBdGMH/installation/configuration-ip)[procedure](../../installation/access-to-the-server) for accessing the TX MODBUS configuration server is identical to that of the receiver. The default address for accessing the TX MODBUS server is **192.168.77.77** .

The **SLAVE SETUP** tab of the TX Modbus server will show you how slave reading has been configured from the receiver.



{% embed url="https://app.arcade.software/share/jUvhL1EE8AKnJmBK7BwO" %}

The **SLAVE STATUS** tab will show you the data read by the TX MODBUS on the slaves. You can confirm the reporting of the same data and register values as in the Modbus table of the receiver.



{% embed url="https://app.arcade.software/share/teORyULnBL73Ev64DZ62" %}
