Reminder regarding proprietary LoRa mode
In proprietary LoRa, the sensors communicate with an Enless receiver (Modbus or BACnet). The receiver stores the sensor data and makes it available to a PLC/BMS.
One receiver can manage up to 50 Enless sensors
If you wish to use the sensors in LoRaWAN mode, please refer to the LoRaWAN mode installation help guide.
With the Modbus receiver
RX MODBUS
Enless sensors send their information to the receiver. The latter stores the data received in a Modbus Table. It is then connected to the BMS via Modbus TCP/IP or RTU.
With the BACnet receiver
RX BACNET
Enless sensors send their information to the receiver. The latter converts the data into BACnet objects. It is then connected to the BMS via BACnet IP or MSTP.