RX REPEATER 600-301
One or more sensors remain out of range of the receiver: you will have to install a repeater. The repeater requires no configuration.
We recommend positioning your repeater halfway between the transmitters and the Modbus receiver. The repeater comes with a 1/4 wave antenna but you can also use a long range antenna to maximize the performance of the repeater. You can chain several repeaters together.
Once positioned, power the repeater. The repeater can be powered either:
• By a 12V power box
• By a main power supply of 7.5 to 24VDC.
Current characteristic for powering the repeater at 12Vdc: 1A max. Use only CE certified 12V power supply
In both cases, the wires will be connected to the POWER terminal block of the repeater:
• Black wire connected to the 0V terminal block
• Red wire connected to the V+ terminal block
The repeater LED behavior is documented here
On the configuration server, frames passing through a repeater indicate (R) next to the RSSI signal value.