Position and secure the sensors in their final locations
Once you have validated that the sensors are paired and communicating with the LoRaWAN network, you can proceed to their installation.
The correct positioning of sensors is very important and significantly influences the quality of radio wave propagation. If your sensor is poorly positioned, you will reduce the radio coverage distance. To maximize transmitter performance, please follow the points described below:
Position the sensors as high as possible
We recommend positioning the transmitters at a minimum height of 1.50m
Make sure the transmitter antenna is always pointing upwards
The sensors are fixed using wall mounting lugs. These lugs are intended for fixing by screw. The lugs of the room sensors (white boxes) are located inside the sensors. For rugged sensors (grey housings), you can also use the mounting collar passages on the sides of the housing.
Ambient sensors
The sensors are fixed using wall mounting lugs. These lugs are intended for screw fixing and are located inside the sensors
Rugged sensors
The product can be fixed using clamps, lugs for screws, or on a DIN rail using mountings sold separately (ref. 1000-005).
