Configuration via MyEnless App

How to configure your sensors using the MyEnless mobile app?

Only the latest-generation sensors can be updated and configured via the MyEnless mobile app.Below are the sensors compatible with updates through the mobile app:

• TX T&H MINI 600-050

• TX T&H AMB 600-051

• TX T&H E-INK AMB 600-052

• TX CO₂ T&H AMB 600-053

• TX LIGHT PIR T&H 600-062

• TX WINDOW 600-050

Configuration Procedure

Step 1

Download the MyEnless app on your mobile device

Step 2

Launch the app

Step 3

To enter configuration mode, press and hold the sensor's push button for 5 seconds until the blue LED lights up, then release

Step 4

The sensor will appear on your mobile app; you will be able to select it and access its information. From there you can either change its settings or upgrade its firmware if a new firmware is available.

Step 5

Once you are done with your changes, you can press and hold the push button for 5 seconds to return to normal mode