4/20mA probe wiring

The TX 4/20 transmitter is delivered without analog probe.

To connect your 4/20mA probe to the sensor, open the sensor housing and refer to the label located inside the transmitter under the terminal block for connection.

Powering your 4/20mA probe by the sensor is only possible if your probe can be powered with less than 3V.

PreviousTX PULSE LED NextAutonomy of batteries

Last updated 6 months ago

Was this helpful?

The TX 4/20 transmitter is delivered without analog probe.

To connect your 4/20mA probe to the sensor, open the sensor housing and refer to the label located inside the transmitter under the terminal block for connection.

Powering your 4/20mA probe by the sensor is only possible if your probe can be powered with less than 3V.

📂

📎