Sensor Configuration

Declare and configure sensors from the CONFIG TX tab of the receiver's server

From the CONFIG TX tab, you can declare new sensors and configure their settings. This includes assigning a unique identifier to each sensor, setting transmission intervals or other relevant parameters based on your use case.

Video Example

Configuration Settings

Below are the details of the configuration parameters:

Field	Meaning
Type TX	Choose the sensor type
Location	Indicate the location of the sensor (e.g. office)
LoRa ID	Enter the LoRa ID (provided on the sensor label).
Periodicity	Choose the transmission periodicity. The transmission periodicity directly influences the battery autonomy of the products.
+ Advanced	Show advanced settings.

Repeat this process for each sensor you wish to configure. The list of declared sensors will appear on the CONFIG TX page.

Changing the Configuration

You can resume configuring a sensor at any time or delete it using the Edit or Delete buttons. You will need to restart the sensor for it to apply its new settings (unless you had enabled the "New Config" option).

We recommend exporting your configuration file in CSV format to save and preserve your settings.

If If you wish to configure a TX IO or a TX MODBUS, please refer to the specific installation procedure for these products (see the menu on the left).