About proprietary LoRa

Reminder regarding proprietary LoRa mode

---

Proprietary LoRa architecture

In proprietary LoRa, the sensors communicate with an Enless receiver (Modbus or BACnet). The receiver stores the sensor data and makes it available to a PLC/BMS.

With the Modbus receiver

RX MODBUS

Enless sensors send their information to the receiver. The latter stores the data received in a Modbus Table. It is then connected to the BMS via Modbus TCP/IP or RTU.

With the BACnet receiver

RX BACNET

Enless sensors send their information to the receiver. The latter converts the data into BACnet objects. It is then connected to the BMS via BACnet IP or MSTP.

One receiver can manage up to 50 Enless sensors

Differences between LoRaWAN and Enless proprietary LoRa

If you wish to use the sensors in LoRaWAN mode, please refer to the LoRaWAN mode installation help guide.