Installation of devices
Position and secure the devices in their final locations
Last updated
Was this helpful?
Position and secure the devices in their final locations
Last updated
Was this helpful?
Once you have paired the sensors to the receiver and validated that they are communicating correctly with the receiver, you can move on to installing them.
The correct positioning of sensors is very important and significantly influences the quality of radio wave propagation. If your sensor is poorly positioned, you will reduce the radio coverage distance. To maximize transmitter performance, please follow the points described below:
Position the sensors as high as possible
We recommend positioning the transmitters at a minimum height of 1.50m
Make sure the transmitter antenna is always pointing upwards
The sensors are fixed using wall mounting lugs. These lugs are intended for fixing by screw. The lugs of the room sensors (white boxes) are located inside the sensors. For rugged sensors and receivers (grey housings), you can also use the mounting collar passages on the sides of the housing.
Ambient sensors
The sensors are fixed using wall mounting lugs. These lugs are intended for screw fixing and are located inside the sensors
Rugged sensors and receivers
The product can be fixed using clamps, lugs for screws, or on a DIN rail using mountings sold separately (ref. 1000-005).
